Call Now

Managing Oily Water Waste in Workshops and Wash Bays

Automotive workshops, vehicle wash facilities and industrial cleaning operations generate wastewater containing oil, fuel, detergents, grease and suspended solids. If this material enters the wrong drain or is disposed of incorrectly, it can pollute waterways and create environmental risks.

Managing oily water waste requires more than removing visible oil. Businesses need to collect wastewater correctly, separate contaminants and ensure that the remaining water receives appropriate treatment before discharge or other management.

Keep Oily Wastewater Out of Stormwater Drains

Oil and fuel can enter wastewater during vehicle washing, engine cleaning, equipment maintenance and workshop floor cleaning. Detergents and degreasers can also carry contaminants into the water, along with dirt and sediment.

Stormwater drains generally carry runoff directly towards waterways rather than through a wastewater treatment plant. Allowing oily wash water to enter these drains can introduce pollutants into creeks, rivers and coastal environments.

Workshops should use designated wash bays with suitable drainage and wastewater collection systems. These areas should be positioned away from stormwater drains, with measures put in place to contain spills and prevent contaminated runoff from escaping.

Before washing the area, clean up any spills with absorbent materials. Removing oil and other contaminants before they enter the wastewater stream helps reduce pollution and the load on treatment equipment.

Collect Wastewater Separately from Concentrated Chemicals

Workshop wastewater requires different treatment depending on its contents. Water contaminated with small amounts of oil needs to be managed differently from concentrated waste oil, fuel, solvents and other chemical liquids.

Oil-water separators are designed to remove certain contaminants, but they cannot treat all types of wastewater. Large quantities of oil, fuel or unsuitable chemicals can interfere with separation and create additional hazards.

Collect concentrated liquid waste separately in appropriate, securely stored containers. Storage areas should be designed to contain spills and prevent liquids from entering stormwater or sewerage systems.

Good housekeeping also helps. Limiting unnecessary water use and selecting cleaning products compatible with the treatment system can reduce contamination. Quick-break detergents may help oil separate from water, but the products used should suit the equipment and any requirements imposed by the relevant water authority.

Separate Oil and Solids Before Further Treatment

Oily water treatment typically involves several stages because different contaminants require different removal methods.

Initial screening or filtration removes larger particles and debris. Floating oil and fuel can then be separated from the water, reducing hydrocarbon contamination.

However, removing visible oil does not necessarily make wastewater suitable for discharge. Fine suspended particles, emulsified contaminants and pH imbalances may require further processing.

The appropriate treatment method depends on the wastewater’s composition, the volume generated and its intended destination. Businesses operating their own separation equipment should follow manufacturer instructions and arrange regular servicing. Accumulated oil, sludge and solids can reduce treatment performance if they are not removed as required.

Treat the Remaining Water Before Discharge

Even after initial separation, wastewater may contain contaminants that are not visible. Further treatment may therefore be necessary before discharge or another approved method of management.

Summerland Environmental collects oily water from automotive businesses, vehicle wash sites and laundries for processing. Our process begins with filtration, followed by the removal of floating oil and fuel. The remaining water undergoes pH adjustment, flocculation and precipitation to remove suspended matter, followed by a further two-stage cleaning process.

The treated water is then discharged to sewer, with discharges monitored by council.

This process demonstrates why surface separation alone may be insufficient. Treatment needs to address the contaminants present and meet the requirements for the intended discharge. Clear-looking water should not automatically be considered suitable for release.

Check Discharge Requirements and Arrange Appropriate Waste Removal

In New South Wales, businesses may need approval from their local council or water authority before discharging commercial wastewater to sewer. Requirements depend on the activity, wastewater characteristics and receiving system.

A workshop connected to sewer, for example, may need an approved pre-treatment system and a trade waste agreement. Installing a separator does not automatically authorise discharge, and some liquids may need to be collected for off-site treatment or disposal.

Confirm the requirements for your premises before establishing a wastewater management process. Understand what your equipment can accept and which materials must be collected separately.

For off-site processing, choose a provider with the appropriate capabilities, permits and licences for the waste involved. Keep relevant collection and disposal records, and establish a maintenance schedule based on the volume of wastewater generated.

Manage Oily Water Waste with Summerland Environmental

A suitable oily water management plan combines effective collection and treatment with a clear understanding of discharge requirements.

Summerland Environmental provides oily water collection and processing services for businesses across Northern NSW. If your workshop or wash facility generates oily wastewater, contact our team to discuss your requirements and find a suitable way to manage this waste stream.

Call 02 6687 2880 now for a free quote

Liquid Waste Management services in Lismore, Ballina, Byron, Kyogle, and Richmond Valley council areas.

Talk to Us